Low Voltage DRC with phase dimmers on generator circuits

Kevin Bannon

New member
Low voltage room control with emergency power application. 1 x DRC00-0L0 room control communicating with 2 x DRDDP-A40 in a application. The DRC00-0L0 is connected to emergency power source through the EM panel. When the generator is cycle tested the dimmed phase loads do not return to the most recent pre-set levels. Is there a method to have the phase loads return to the preset level after emergency power is cycled.
 
Low voltage room control with emergency power application. 1 x DRC00-0L0 room control communicating with 2 x DRDDP-A40 in a application. The DRC00-0L0 is connected to emergency power source through the EM panel. When the generator is cycle tested the dimmed phase loads do not return to the most recent pre-set levels. Is there a method to have the phase loads return to the preset level after emergency power is cycled.
Please see: Best practice when Using a Low voltage DRC room controls with generator power. at https://communities.leviton.com/threads/best-practice-when-using-a-low-voltage-drc-room-controls-with-generator-power.86/
 
Back
Top