DRC Wireless and UL924

[john.rucker]

When considering emergency lighting for DRC Wireless or LuminaRF, is a second Wireless Load Control Power Pack required in addition to a UL924 switching device?

 

[dbuerer]

Great question John. It the answer depends on the layout of the space. For UL924 in a wireless solution with power packs, you will need to use either a UL924 bypass or transfer device depending on your layout. If it's only one fixture or a single zone that's going on emergency, then you could use a bypass or transfer device on that relay . If it crosses zones however you may need separate power packs.