1 Reply Latest reply: Jan 21, 2016 8:40 PM by GOrrigo RSS

IPS02 occupancy switch turns on when circut breaker is engaged, but then does not work

Visibility: Open to anyone

Re IPS02 occupancy switch: I have installed two of these swtiches in the same a single pole application, and neither has worked. I connected Black wire to black terminal, White wire to red (pinkish) terminal and ground to ground. I have tested the wiring at the terminals and get 117.5 volts.  When I Flipped the circuit breaker back-on, the fFet LED light turned and stayed on. But when I dressed the on/off switch to turn it off, the light shut off, but could not be turned back on by either depressing the switch or y motion detection. Please advise.