I replaced a Lutron DV-603P with a VR106-1LZ and swapped the generic paddle switch on the other end of the three-way with a VP00R-10Z. The lights come on fine and the VR106 allows me to dim them. However, the VP00R won't turn the lights on or off.
The box that I put the VP00R into had just a single red, black, white and ground wire and nothing else. I wired the switch per the instructions, with the neutral wire capped since there were no other neutrals to attach it to.
Is that switch incompatible with the VR106 or should it be wired differently? Appreciate any advice.