1 Reply Latest reply: Jan 10, 2012 4:20 PM by bobf RSS

Program a LEVVRCS4-MRZ with Installer Tool

Newbie

Hello,

 

I'm trying to program a LEVVRCS4-MRZ with the Installer tool and i'm having issues getting it to do anything.

 

I have included the switch successfully and I see it in the Installer Tool.

 

I created an Area called "Test" and I added two lamp modules to this area

 

I assigned this area to Button 1, and I've tried "scene" (i went to the sub modules, pressed on and said "save scene level") and "on/off"

 

I then went back up the tree and said "Update Controller"

 

Unfortunately when i press the button it doesn't turn the lights on or off.  The LED for the button flashes for a second when I press the button.

 

Any thoughts on how i can continue to debug this?

 

Thanks

 

M

  • Program a LEVVRCS4-MRZ with Installer Tool
    Newbie

    M

    On the right side of the Vizia RF installer tool on the Association screen:

    Select the “Scene” button to the right of the area

    Select “Suggest” in order for the software to suggest a scene number

    Select “Immediate” for fade rate

    On the left side of the Vizia RF installer tool under the Association tab

    Select the device

    On the right side of the screen under the device control:

    If the device is not already on; enter a percentage to the left of the “set” button and then select “set”

    Select “refresh” to have the software read the device level

    Select “Save Scene Level”

    Do the same for each device

     

    Don’t forget to do a “Deployment”