0 Replies Latest reply: Apr 19, 2012 4:20 PM by J89 RSS

How do I upgrade the firmware for the Internet Gateway / Router / 4-Port Gigabit Router?

Wayfarer

To determine what version of the 47611-GT4 device you have, click here

 

*Note: There is no firmware update released for the Version 3 router at this time. This page will be updated if one is made available. The following instructions pertain to Versions 1 and 2 only.

 

To determine what version of firmware is currently installed on the device, log into the router.

 

From the main menu, click on the "Status" folder, then the submenu "Status". This will display the screen that shows the current firmware version. Compare your current firmware version to the versions listed below. If you are not running the current firmware as shown below, follow the instructions for your specific device to upgrade.

 

47611-GT4 Version 2

Instruction for downloading and installing firmware upgrade:

 

1.  47611-GT4 Version 2 (1.1 release 31) can be found here.

2.  Scroll to the bottom of the page and click on the "Downloads" tab

3.  Click on the link titled "4-Port Gateway Firmware v.1131

4.  Save the file to your hard drive where it can be easily found (like the desktop)

5.  Open a browser window and type http://192.168.0.1 in the address bar

6.  You will be asked to enter a user name and password. User name should be left blank. The password is "leviton" (all lowercase)

7.  Click on "Tools" then on "Upgrade"

8.  Click on the "Browse" option and choose the firmware file that was saved to the desktop.

9.  Click "Start Upgrade".

 

After these steps are completed, the device will automatically restart. Once the device has restarted, you will be redirected to the main menu.

 

To check if the firmware upgrade was successful, click on the "Status" folder, then the submenu "Status". This will display the screen that shows the current firmware version.

 

 

47611-GB4 4-Port Gigabit Router

Instruction for downloading and installing firmware upgrade:

 

 

1.  Click on the link titled "4-Port Gigabit Router Firmware v101B"

2.  Save the file to your hard drive where it can be easily found (like the desktop)

3.  Open a browser window and type http://192.168.0.1 in the address bar

4.  You will be asked to enter a user name and password. User name should be left blank. The password is "leviton" (all lowercase)

5.  Click on "Tools" then on "Upgrade"

6.  Click on the "Browse" option and choose the firmware file that was saved to the desktop.

7.  Click "Start Upgrade".

 

After these steps are completed, the device will automatically restart. Once the device has restarted, you will be redirected to the main menu.

 

To check if the firmware upgrade was successful, click on the "Status" folder, then the submenu "Status". This will display the screen that shows the current firmware version.

 

47611-GT4 Version 1. Call Leviton Tech Support at 1-800-824-3005 for upgrades.

 

For further instructions on setting up and using your Internet Gateway / 4-Port Internet Gateway Router, click here.