• LED Holiday lights and Viziz VRR15-1LZ, RZP03-1LW

    1) I have noticed that when using LED Holiday lights with VRR15-1LZ and the RZP03-1LW that they do not turn off completely.  Is this correct?  Can anything be done about this?   2) The VRS15-1LZ works ...
    created by PaulB
  • Promoting a VRUSB-1US from secondary to primary?

    I have a Vizia RF+ network with a handheld VRCPG-OSG as the primary and a VRUSB-1US as the secondary.   I would like to make the VRUSB-1US the primary and the VRCPG-OSG the secondary.  How can I do this?
    created by PaulB
  • CFL and Vizia RF+ switches, dimmers and plugin modules?

    I would like to know which Vizia RF+ switches, dimmers and plugin modules will work with CFL devices and not cause a flicker when off?   Thanks,
    created by PaulB
  • Vizia RF+ installer tool problem.

    The version of the tool is 1.0.4.   In the left pane under "ALL Devices" some of the circle are light green.  If I however the cursor of the light green it says "Device information incomplete - Please re-in...
    created by PaulB
  • Lights on 4 button RF+ zone controller VRCZ4-1l

    I have a VRCZ4-1L 4 button zone controller in my master bedroom.  One of the buttons controls 6 Vizia RF+ lights that are in the house on different floors and differents ends of the house.  The idea being th...
    created by PaulB
  • Vizia RF+ installer tool and VRCPG-OSG

    I have been experimenting with the installer tool with marginal success.  Don't get me wrong I think this tool has real promise for installers.   Is there a document or application note that covers using th...
    created by PaulB
  • Vizia RF+ installer tool questions?

    I have the software version 1.0.3.0 installed and purchased the Leviton USB stick (VRUSB-1US).  I am using a laptop with Windows 7 Enterprise addition.  I have a couple of questions.   1) How do I dete...
    created by PaulB
  • z-wave beaming?

    Can anyone provide some information on z-wave beaming or point me to a link?   How important is it?   Is beaming part of the z-wave standard?   Will VRCOP-1lW support beaming if it is part of the sta...
    created by PaulB
  • Vizia RF+ installer tool.

    If you are installing the tool on a Windows 7 system that already has .NET 4.0 do you still need to install .NET 3.xx as part of the tool install?
    created by PaulB
  • Does VRCOP-1LW support Kwikset Motorized Deadbolt?

    I would like to know if VRCOP-1LW supports the new Kwikset Motorized Deadbolt with Home Connect (zwave)? If not is support planned?  If so, any time frame?   I am trying to design a system for my house wh...
    created by PaulB