1 Reply Latest reply: Mar 29, 2011 10:54 AM by Leviton Technical Representative RSS

How to improve reliability with Vizia RF + serial interface module?

Newbie

We have a VIZIA RF + network with 120 nodes. The reliability with the Vizia RF + serial interface module is very poor. Some nodes work 80% of the time and other nodes work 2% of the time. We are using the installer tool v 1.0.4.0 and the think stick adapter as the primary controller and have performed the following steps in the order shown below as discussed in the Leviton Tech memorandum Vizia RF + advanced menus document dated 6-26-08

 

Step 4.2 go to advanced /RS232 Setup and confirm all devices in the network have been associated to the serial interface

Step 3.3 Network Rediscovery at -6db for all nodes

Step 3.4 Network Update Controller for all controllers in the network

Step 3.9 Update Routes for all nodes

 

Hop Count and link quality function from Vizia RF + serial interface module to all nodes and the hop count ranged from 1 to 3 as shown on the sample screen shot on the attached file.

 

Please let us know which way to proceed to improve reliability with Vizia RF + serial interface module.

 

Thank You