to follow, share, and participate in this community. Not a member?
What is the spacing for installed bend radius guides (SRAGD-SLT) in 4x4, 4x8, or 4x12 slotted Fiber Raceway? What is the dimension of the hole cut if using the side cut out tool on fiber raceway? PN S4CUT-TOL When using the OIP what ceiling considerations should be evaluated? Can you use splice trays with the e2XHD rear cable managers? Is there a way to mount a 1RU panel and a 1RU fiber enclosure underneath wire mesh tray? When using the OIP what cabinet considerations should be evaluated when being used in a restricted ceiling enviornment? What is the standard height for the OIP (Overhead Infrastructure Platform)? What is the TIA standard for fiber backbone distance? What is the pull force on a trunk cable with pulling eye? Do I need to have the total height of the cabinet to know if I can use ti with the OIP system? Here is a handy chart to help you answer that question! Fiber Duct Cable Fill Rates for Plug and Play Pre-terminated Fiber Trunk Cables Duct Size Inches (mm) Trunk fiber cou... A hand saw is the best kind of saw to use for cutting race way. This will allow for more controle and saftey durning the cutting process. The saw should be at least 18 inches in length , 20 inches is preferable.... I assume that I can connect a S4DMB-000 (duct mounting bracket) to a peice of unistrut with a screw and washer? I'm looking to implement two fiber raceways - one 4x4 for network and another 2x2 for fiber. My only way to mount is off a ladder rack system that is currently in place over top. Using the mounting kits for these size...