to follow, share, and participate in this community. Not a member? Join Now!
The max operating temperature range of the 26725 CFL lampholder is 125 degrees Celsius. All indoor and damp location (covered) outdoor commercial downlight spaces using troffer lighting are potential Zipline LED retrofit customers. Spaces that are difficult to reach for re-lamping are prime targets. Fixt... The Zipline LED roadmap includes, but is not limited to the following: - Integral sensor equipped models - Full fixture (non-retrofit)... Yes, these models will be available later in the year. No. In most cases the internal components will need to be removed from the fixture. Our retrofit solution installs into the existing troffer without having to remove the original fixture. After removing the components from the fluorescent troffer, the Zipline LED installs in minutes. Leviton recommends the following dimmers and will be updated with more compatible Leviton dimmers: Cat. No. ... Yes. The present version of Zipline LED is 0-10V dimmable and works well with our Renoir II dimmers. Replacement trim pieces will be available for purchase. No. To obtain a lower lumen output, Leviton will provide a Zipline model with a driver calibrated to provide less power to the LEDs. Yes. They can also be upgraded over time as LEDs become more efficient. Zipline LED light arrays are superior to most LED tubes or T-LEDs in safety, appearance, longevity, replace-ability and performance. Indirect-mounted LEDs offer highly – efficient light output with reduced glare... Yes. The driver is easily reachable by removing the retrofit tray. It connects using standard connectors. Currently we are using Inventronics drivers. This is subject to change without notice. Yes. Photometrics for the both the 2X4 and 2X2 version are available for download at the Zipline LED mini site. Zipline LED comes in 4000K and 3500K color temperatures. Zipline LED 2X4 draws 60 watts, provides 5700 lumens in output and has approximately 94 lumens/watt fixture efficiency. Zipline LED 2X2 draws 37 Watts, provides 3400 lumens in output and has approximately 92 lumens/w... 120V-277V AC, voltage sensing.